Posted on November 19, 2026, 8:48 am By admin
Pioneer CT-F9191 Stereo Cassette Deck. Pioneer CT-F9191 – Front-loading stereo cassette deck with distinctive dual analog VU meters. Dual-Motor Transport: Electronically controlled DC playback motor and separate DC torque motor for fast-forward and rewind. Dolby Noise Reduction: Supports Standard/LH and CrO? Cassette tapes, with manual bias and equalization selection for Ferri-Chrome tapes. Recording & Playback: Four-track, two-channel stereo configuration with dedicated recording controls. HQaudios Restoration: Replaced drive belt, serviced transport, replaced capacitors and VU meter lamps. The Pioneer CT-F9191 is a distinctive front-loading stereo cassette deck from Pioneer’s classic vintage audio lineup. Its combination of a precision tape transport, analog recording meters, and dedicated recording controls reflects the engineering approach of Pioneer’s cassette decks during this era. The CT-F9191 features a two-motor transport system, using an electronically controlled DC motor for tape movement and a separate DC torque motor for fast-forward and rewind. Its Ferrite Solid recording/playback head and ferrite erase head support a four-track, two-channel stereo recording and playback system. The deck also provides Dolby noise reduction, tape selection, manual bias and equalization controls, microphone and line inputs, and large analog VU meters for monitoring recording levels. HQAUDIOS RESTORATION & TESTING. Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications. When received, the Pioneer CT-F9191 was not operating properly. The power-supply section and tape transport required service. The Play/Record switches and volume control required cleaning, and the VU meter lamps needed replacement. We serviced the electronic and mechanical systems according to HQaudios restoration standards. Heads: We cleaned, demagnetized, and inspected the recording/playback and erase heads for wear. Drive Belt: We replaced the drive belt with a new belt. Pinch Roller & Idler: We cleaned and inspected the tape-contact and drive components. Transport Mechanism: We cleaned and lubricated the transport mechanism for smooth operation. Tape Speed: We adjusted the tape speed to the factory specification. Capacitors: We tested and measured the capacitors and replaced out-of-spec units, including 2200 µF / 63 V ×2 and 470 µF / 35 V ×4. Circuit Boards: We cleaned the circuit boards, inspected their connections, and reinforced weak solder joints. Switches, Controls & Jacks: We cleaned and serviced the switches and connections, including the Play/Record switches and volume control. VU Meter Lighting: We replaced the VU meter lamps with new lighting components. After Restoration / Final Testing. Burn-In: A 72-hour burn-in test was completed to verify operational stability. Playback & Recording: Playback, recording, and monitoring functions were tested. Transport: Play, fast-forward, rewind, and auto-stop functions were tested. Tape Speed: Tape speed was verified during final testing. Dolby & Meter Operation: Noise-reduction operation and VU meter response were tested. Final QC: A final listening test and functional quality-control inspection were completed. Playback & Recording: Functional playback and recording operation. Transport: Play, fast-forward, rewind, and auto-stop functions operate normally. Switches & Controls: Play/Record switches and volume control operate normally. VU Meters: Both meters illuminate and respond during operation. Faceplate: Silver faceplate with clearly presented Pioneer lettering and control markings. Wood-Grain Panels: Wood-grain top and side panels with visible vintage character and surface wear. Panel Corner: A chipped and damaged area is visible at one corner of the wood-grain trim. Please review the close-up photograph. Overall Presentation: A carefully presented vintage cassette deck with normal signs of age and the cosmetic details shown in the photographs. Transport and Recording Functions Tested. Final Functional Inspection Completed. Type: 2-Head Stereo Cassette Deck. System: Compact Cassette, 4-Track, 2-Channel Stereo. Heads: Ferrite Solid Recording/Playback Head ×1; Ferrite Erase Head ×1. Motors: Electronically Controlled DC Motor ×1; DC Torque Motor ×1. Tape Speed: 1? Ips (4.8 cm/s). Tape Types: Standard/LH, CrO? , Ferri-Chrome (manual bias/equalization selection). Wow & Flutter: 0.07% WRMS or less (measured at 3 kHz). Frequency Response: Standard/LH: 25 Hz – 16 kHz (35 Hz – 13 kHz ±3 dB); CrO? : 20 Hz – 17 kHz (30 Hz – 14 kHz ±3 dB). Signal-to-Noise Ratio: More than 52 dB (Dolby OFF); more than 62 dB (Dolby ON, over 5 kHz, Standard/LH tapes). Total Harmonic Distortion: 1.7% or less (0 dB). Inputs: MIC ×2; LINE ×4 (parallel stereo); REC/PB DIN ×1. Outputs: LINE ×4 (parallel stereo); Headphone ×1; REC/PB DIN ×1. Current Operating Voltage: 120V AC. Power Consumption: 53 W maximum. Dimensions: 17.9 W × 7.9 H × 12.4 D in. Weight: 29 lbs (net, without packaging). 1 × Pioneer CT-F9191 Stereo Cassette Deck. Only the items specifically listed above are included. Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance. Need restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option? Contact HQaudios for available services and package pricing.

Categories: pioneer Tags: 1-year, cassette, ct-f9191, deck, dolby, pioneer, restored, warranty