https://refurbishedcassetteplayer.com Fri, 25 Sep 2026 11:17:49 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://refurbishedcassetteplayer.com/sony-cassette-deck-tc-w3-new-belts-refurbished-vintage-sony-cassette-player/ https://refurbishedcassetteplayer.com/sony-cassette-deck-tc-w3-new-belts-refurbished-vintage-sony-cassette-player/#comments Sun, 20 Sep 2026 22:57:38 +0000 https://refurbishedcassetteplayer.com/sony-cassette-deck-tc-w3-new-belts-refurbished-vintage-sony-cassette-player/













Brand new belts installed and cleaned up but honestly it was pretty clean inside to start with. Both sides play as they should. Overall condition is great but has some scratches on top right side other than that nothing els to note.

]]> https://refurbishedcassetteplayer.com/sony-cassette-deck-tc-w3-new-belts-refurbished-vintage-sony-cassette-player/feed/ 0 https://refurbishedcassetteplayer.com/marantz-5030b-black-3-head-stereo-cassette-deck-restored-1-year-warranty/ https://refurbishedcassetteplayer.com/marantz-5030b-black-3-head-stereo-cassette-deck-restored-1-year-warranty/#comments Sat, 19 Sep 2026 10:54:40 +0000 https://refurbishedcassetteplayer.com/marantz-5030b-black-3-head-stereo-cassette-deck-restored-1-year-warranty/




















Marantz 5030B 3-Head Cassette Deck – Custom Black Faceplate. 3-Head Stereo Cassette Deck. Late 1970s / Introduced 1978. 1 Record + 1 Playback + 1 Erase Head. Normal / CrO2 / FeCr. Custom Black Faceplate Finish. 120V AC / 60Hz – Standard U. Professionally Restored, Serviced, and Function-Tested. Very Good Vintage Condition. Custom Finish Disclosure: The black faceplate on this unit is a custom finish and is not being represented as a factory-original black-face version. Why the Marantz 5030B Stands Out. The Marantz 5030B is a late-1970s three-head cassette deck designed for simultaneous record/playback monitoring. Its separate record and playback heads allow the user to monitor the recorded signal directly from the tape while recording. The deck also provides Dolby B noise reduction, Normal / CrO2 / FeCr tape settings, microphone and line mixing, a master recording-level control, memory rewind, peak indication, and a DC-servo transport. Transport, Recording & Monitoring Architecture. Three Separate Heads: Record / Playback / Erase. True Off-Tape Monitoring during recording. Dolby B Noise Reduction. Normal / CrO2 / FeCr Tape Selection. Microphone + Line Mixing Capability. Memory Rewind / Peak Indication. Dual Analog VU Meters. HQaudios Restoration & Multi-Point Quality Control. Professionally Restored. Function-Tested. Recording & Playback Tested. As received, this Marantz 5030B showed the mechanical and age-related service needs typical of a vintage cassette deck. The original drive belt had deteriorated, and age-related contamination and oxidation affected the transport, tape path, controls, and switches. A full inspection of the front-loading transport, drive belt, capstan, pinch roller, idlers, three-head assembly, motor speed stability, record/playback circuitry, switches, controls, VU meters, indicators, and tape path was carried out to determine the work required for this specific unit. Based on the inspection results, this Marantz 5030B was restored according to HQaudios’ technical standards while preserving its original engineering and operating characteristics. The deteriorated original drive belt was replaced with a new belt, and tape speed was checked and adjusted. Transport linkages were cleaned and re-lubricated to restore smooth mechanical operation. The record, playback, and erase heads, along with the tape path, were thoroughly cleaned, and the heads were demagnetized. Switches and controls were cleaned and treated with contact cleaner to remove oxidation and restore reliable operation. Indicator and display illumination was inspected and serviced as required. The chassis, tape well, controls, and custom black faceplate were professionally cleaned and detailed. Once restoration was completed, the Marantz 5030B underwent comprehensive functional and operational testing. Play, Record, Fast Forward, Rewind, Auto-Stop, tape/source monitoring, Dolby B operation, tape selection, recording controls, VU meter response, and transport operation were checked. Finally, the deck underwent an extended recording and playback test to evaluate transport stability, audible pitch consistency, channel balance, off-tape monitoring, recording quality, and overall operational reliability before being approved for sale. Professionally Restored. ? New Drive Belt. ? Tape Path Serviced. ? Function-Tested. ? Recording & Playback Tested. Recording & Playback Character. The Marantz 5030B is designed for serious analog recording and playback, with its three-head architecture allowing true off-tape monitoring during recording. With a properly maintained transport, clean tape path, correctly selected tape formulation, and appropriate recording levels, the deck provides stable playback, useful recording control, and the classic analog cassette experience expected from a high-quality late-1970s deck. This unit presents in very good vintage cosmetic condition, with normal signs of age and previous use consistent with a late-1970s cassette deck. Custom Black Faceplate: The custom black front panel presents well overall, with contrasting lettering and control markings remaining clear and easy to read. Knobs / Controls / Keys: Controls and transport keys are intact and present well. Cassette Compartment: The front-loading tape door and tape well present cleanly. VU Meters / Indicators: Dual analog meters and indicator functions were checked during final testing. Chassis / Housing: The original metal chassis cover remains structurally solid with normal age-related wear. Please inspect all product photos closely; they show the exact unit and form an important part of the condition description. 3 Heads – 1 Record + 1 Playback + 1 Erase. Normal (Type I) / CrO2 / FeCr. 35Hz-14kHz Normal / 35Hz-17kHz CrO2 & FeCr. 17.4 W × 5.75 H × 11.7 D inches. This Marantz 5030B is configured for standard U. 120V AC / 60Hz operation and is ready for normal U. No step-down transformer is required for use in the United States. International buyers should verify local mains voltage and use an appropriate voltage transformer when required. The Marantz 5030B connects to vintage or modern amplifiers and receivers through standard line-level RCA inputs and outputs. Its styling makes it a natural visual companion for late-1970s Marantz components, while its standard line-level connections allow it to be used with many other stereo systems. One Marantz 5030B Stereo Cassette Deck with Custom Black Faceplate. The sale includes the Marantz 5030B cassette deck shown in this listing only. Operational video demonstration may be available upon request. Recording / playback and tape-monitor demonstration can be provided. A multi-item discount may be available when building a complete vintage system. Selected high-value vintage audio equipment may be considered for trade-in. Keep the heads, capstan, and tape path clean using appropriate cassette-deck cleaning materials. Avoid aggressive solvents on rubber components such as the pinch roller. Use clean, good-quality cassette tapes and avoid moldy, sticky, or physically damaged media. Do not force the mechanical transport keys. Vintage mechanical cassette decks require careful packing. This Marantz 5030B will receive protective coverage around the custom black faceplate, VU meters, cassette door, transport controls, knobs, corners, and rear connections, together with dense internal cushioning and a heavy-duty outer carton. HQaudios – Vintage Audio Restored with Care.

]]> https://refurbishedcassetteplayer.com/marantz-5030b-black-3-head-stereo-cassette-deck-restored-1-year-warranty/feed/ 0 https://refurbishedcassetteplayer.com/akai-gx-65-stereo-cassette-deck-3-head-vintage-1990-refurbished-work-good-look-8/ https://refurbishedcassetteplayer.com/akai-gx-65-stereo-cassette-deck-3-head-vintage-1990-refurbished-work-good-look-8/#comments Thu, 17 Sep 2026 22:51:38 +0000 https://refurbishedcassetteplayer.com/akai-gx-65-stereo-cassette-deck-3-head-vintage-1990-refurbished-work-good-look-8/








AKAI GX-65 Stereo Cassette Deck 3 Head Vintage 1990 Refurbished WORK Good Look. Stereo Cassette Deck (1990-93). Type: 3-head, single compact cassette deck. Track System: 4-track, 2-channel stereo. Tape Speed: 4.76 cm/s. Heads: 1 x record, 1 x playback, 1 x erase. Motor: 1 x reel, 1 x capstan. Tape Type: type I, CrO2, Metal. Noise Reduction: B, C. Frequency Response: 15Hz to 21kHz (Metal tape). Signal to Noise Ratio: 72dB (dolby C). Wow and Flutter: 0.06%. Total Harmonic Distortion: 0.7%. Output: 0.388V (line). Dimensions: 425 x 137 x 353mm. AKAI GX-65 Stereo Cassette Deck 3 Head Vintage 1990 Refurbished WORK Good Look Akai GX-65 Stereo Cassette Deck (1990-93) Specifications: Type: 3-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.76 cm/s Heads: 1 x record, 1 x playback, 1 x erase Motor: 1 x reel, 1 x capstan Tape Type: type I, CrO2, Metal Noise Reduction: B, C Frequency Response: 15Hz to 21kHz (Metal tape) Signal to Noise Ratio: 72dB (dolby C) Wow and Flutter: 0.06% Total Harmonic Distortion: 0.7% Input: 70mV (line) Output: 0.388V (line) Dimensions: 425 x 137 x 353mm Weight: 5.5kg. Akai GXC-730D 3-Head Auto Reverse Cassette Deck Vintage 1976 WORK Good Look. HH SCOTT 675DM Stereo Cassette Tape Deck 2 Head Vintage 1980 WORK Good Look. TECHNICS RS 630T Stereo Cassette Tape Deck 2 Head Vintage 1978 Good Condition. PIONEER CT-740 Stereo Cassette Tape Deck 2 Head Vintage 1983 Work Good Look. PIONEER CT-506 Stereo Cassette Tape Deck 2 Head Vintage 1978 Work Good Look. PIONEER CT 920 (CT-F950) 3 Head Stereo Tape Deck Cassette 1979 Work Good Look. Marantz 5220 Stereo Cassette Tape Deck 2-Head Vintage 1977 Silver. TECHNICS RS 615 US Stereo Cassette Tape Deck 2 Head Vintage 1976 Works Good Look.

]]> https://refurbishedcassetteplayer.com/akai-gx-65-stereo-cassette-deck-3-head-vintage-1990-refurbished-work-good-look-8/feed/ 0 https://refurbishedcassetteplayer.com/refurbished-jvc-td-w217-2-head-dual-cassette-dolby-nr-processor-deck-tape-19/ https://refurbishedcassetteplayer.com/refurbished-jvc-td-w217-2-head-dual-cassette-dolby-nr-processor-deck-tape-19/#comments Wed, 09 Sep 2026 10:24:38 +0000 https://refurbishedcassetteplayer.com/refurbished-jvc-td-w217-2-head-dual-cassette-dolby-nr-processor-deck-tape-19/













It is one of the top-of-the-line JVC. It features 4 – Heads. Peak Level Display Indicator. Nice over all cosmetic condition as seen in pictures 1 – 6. Works great / tested as seen in pictures 1 – & 7 – 11. The Heads have been cleaned & demagnetized as seen in picture 11. Please Note: No Instruction Manuel or Component Cable. Service Manual, Syncro cable, OEM Remote & original box isn’t included. You can put your 2 tapes in, and have enough background music to last for a social occasion with the auto reverse feature. It is a component and designed to be hooked up to your existing system. Dual Stereo Cassette Deck Features. Hard Permalloy: Recording / playback head x 1 Head Permalloy playback head x 1 Ferrite erasing head x 1 Other Features: 1. Cue & Review: Music search. Peak level meter with peak. These will be spread across five speakers for middle quality surround sound with support from a Dolby Pro Logic processor from a receiver unit. Please Note: This requires a receiver to process the signal to five speakers. LED Peak Level Display Indicator. Allows to see the DB of the sound. 2 Dual Cassette Deck. Can have to 2 tapes with the ability to record or playback. Cassette Playback, Cassette Recording, Noise Reduction Switch. Normal Play Buttons, Rec/Pause Button, Normal Cassette Counter, Reset Cassette Counter Button, Rec Timer Switch, Recording Balance Dial, LED. Peak Level Indicator, Dolby NR Button. Please Note:”Under License of Staar S. Audio & Video Inputs. 2 Line Left & Right Output & Input on the Rear, &. In the rear as seen in picture 4. The Snycro function automatically sets the record/ playback flat frequency characteristics and opti- mal record/playback tape sensitivity for bringing out maximum tape performance from. Recording from a CD. TD-W217 Dual Cassette Deck. Brown Cabinet Finish 2. Frequency Response: -20dB Recording Type IV (Metal) Tape: 20 to 16,500 Hz Type II (High/CrO2) Tape: 20 to 16,000 Hz Type I (Normal) tape: 20 to 16,000 Hz Signal-to-Noise Ratio: Dolby B-type NR: More than 10dB (at 5 kHz) Dolby C-type NR ON: More than 19dB (at 5 kHz) Harmonic Distortion: No more than 0.8% (at -4 dB: 160 nwb/m). Put Recording Tape in Deck. 2 & place playing tape in Deck 1 & press One. Press record Play button to start recording process automatically. Enjoy Life Everyday and Be Prepared in Every Way. Meta name=”viewport” content=”width=device-width, initial-scale=1″.

]]> https://refurbishedcassetteplayer.com/refurbished-jvc-td-w217-2-head-dual-cassette-dolby-nr-processor-deck-tape-19/feed/ 0 https://refurbishedcassetteplayer.com/pioneer-ct-f8282-vintage-stereo-cassette-deck-restored-1-year-warranty/ https://refurbishedcassetteplayer.com/pioneer-ct-f8282-vintage-stereo-cassette-deck-restored-1-year-warranty/#comments Mon, 07 Sep 2026 10:19:36 +0000 https://refurbishedcassetteplayer.com/pioneer-ct-f8282-vintage-stereo-cassette-deck-restored-1-year-warranty/


















The Pioneer CT-F8282 is a substantial front-loading cassette deck from Pioneer’s mid-1970s silver-face era, combining classic styling with a mechanically sophisticated transport and flexible recording controls. One of its most important engineering features is the two-motor transport system. A servo-controlled DC motor handles normal tape motion during recording and playback, while a separate DC torque motor drives fast-forward and rewind. Pioneer paired this with a solenoid-operated transport for direct mode selection and smooth mechanical control. The recording system uses a Ferrite Solid record/playback head together with a dedicated ferrite erase head. Independent BIAS and EQ selection allows the deck to accommodate Standard / LH, chromium dioxide, and ferri-chrome tapes, while Dolby B noise reduction, memory stop, dual analog level meters, recording peak indication, microphone inputs, and adjustable output level add practical flexibility. This specific unit retains the classic brushed-aluminum front panel, illuminated cassette compartment, dual meters, substantial controls, and full wood cabinet that make the CT-F8282 visually consistent with Pioneer’s classic receiver and amplifier lines. The deck has been professionally serviced, cleaned, and tested by HQaudios. Restoration focused on the power-supply and preamplifier/audio sections, along with transport and drive issues identified during inspection, followed by playback, recording, fast-wind, control, and connection testing. Authentic Pioneer CT-F8282 vintage stereo cassette deck. Servo-controlled DC motor for record / playback tape motion. Separate DC torque motor for fast-forward and rewind. Ferrite Solid record/playback head. Dedicated ferrite erase head. Dolby B noise reduction. Standard / LH, CrO? , and FeCr tape compatibility. Independent BIAS and EQ selection. 0.07% WRMS wow and flutter. 20 Hz-17 kHz Frequency Response with CrO? And FeCr Tape. Dual analog level meters. +5 dB recording peak indicator. RCA Line Input / Output and DIN REC / PLAY. Switchable 120 / 220 / 240V AC operation. Power-supply and preamplifier / audio sections serviced. Transport and drive operation serviced and checked. Playback and recording functions tested after service. Stereo Cassette Tape Deck. 2 – Ferrite Solid Record/Playback + Ferrite Erase. Electronically Controlled DC Motor. 4.8 cm/s / 1? Ips. Solenoid Drive, Direct Switchable. Approximately 65 Seconds with C-60 Tape. Standard / LH, CrO? , FeCr. No More Than 0.07% WRMS. Frequency Response – Standard / LH. Frequency Response – CrO? Frequency Response – FeCr. Signal-to-Noise Ratio – Dolby OFF. More Than 53 dB. Signal-to-Noise Ratio – Dolby ON. More Than 63 dB. No More Than 1.5% at 0 dB. 0.2 mV Reference Level. 60 mV Reference Level. 450 mV Reference Level. DIN REC / PLAY. 452 x 193 x 348.5 mm – W x H x D. 17¾ x 7? X 13¾ Inches – W x H x D. Approximately 12.5 kg / 27.6 lbs. Power Requirement – Actual Unit. AC 120 / 220 / 240V, 50 / 60Hz. Power Consumption – Actual Unit. A properly operating CT-F8282 demonstrates why cassette recording had already become a serious hi-fi format by the middle of the 1970s. With a well-recorded tape, the deck delivers a smooth and naturally balanced presentation with satisfying midrange body and good stereo separation. The Ferrite Solid record/playback head contributes to long-term durability and strong high-frequency performance, while the two-motor transport supports stable tape motion during playback, recording, and fast-wind operation. Using chromium dioxide or ferri-chrome tape extends the response to 17 kHz, giving the deck greater upper-frequency reach than standard formulations. Dolby B further improves perceived background-noise performance when used with correctly encoded recordings. The CT-F8282 fits naturally into a complete period Pioneer system, but its standard line-level connections also allow it to integrate easily with many vintage receivers and integrated amplifiers. HQaudios Restoration & Testing Process. The cassette deck underwent an initial electrical and operational inspection. Power-supply operation was evaluated. Preamplifier and audio-signal operation were checked. Playback and recording functions were evaluated. Play, stop, pause, fast-forward, and rewind functions were inspected. Tape-drive and motor operation were checked. Cassette loading and transport movement were evaluated. Record/playback and erase-head areas were visually inspected. Capstan, pinch roller, and accessible tape-path components were checked. Dual level meters, indicators, switches, controls, inputs, outputs, Memory Stop, and tape-selector functions were evaluated. The power-supply section was serviced. The preamplifier / audio section was serviced. Transport and drive operation received service based on the condition identified during inspection. The tape path was carefully cleaned. Record/playback and erase-head surfaces were inspected and cleaned. Capstan and pinch-roller areas were cleaned and checked. Transport controls and solenoid-operated functions were inspected. Switches and front-panel controls were cleaned and exercised. RCA and accessible signal connections were cleaned and inspected. The cassette compartment and internal operating areas were carefully cleaned. Front panel, knobs, meters, cassette door, and wood cabinet were professionally detailed. Playback operation was tested. Recording operation was tested. Fast-forward and rewind were verified. Play, stop, pause, and transport-control operation were checked. Left and right audio channels were compared. Dual level-meter response was evaluated. Dolby B operation was checked. Standard / CrO? / FeCr selector functions were verified. Memory Stop operation was tested. Line input, line output, and microphone-input operation were checked. Tape movement was monitored for stable operation. Extended cassette playback was used to evaluate real-world stability. Final approval focused on transport reliability, channel consistency, playback, recording, and dependable everyday operation. This Pioneer CT-F8282 presents attractively and retains the distinctive appearance of Pioneer’s mid-1970s component design. The broad brushed-aluminum faceplate, twin illuminated level meters, silver control knobs, cassette compartment, and substantial wood cabinet give the unit a strong visual presence that pairs naturally with classic Pioneer receivers and amplifiers. Normal cosmetic characteristics associated with age and previous ownership may remain, including small marks, finish variation, light scratches, edge wear, or other vintage characteristics. Please review all product photos carefully for the exact condition of the faceplate, wood cabinet, cassette compartment, meters, controls, switches, rear panel, terminals, and connections. One Pioneer CT-F8282 stereo cassette deck. Installed wood cabinet shown in the product photos. Attached AC power cord. Cassette tapes, microphones, RCA cables, DIN cables, receiver, amplifier, speakers, and other equipment are not included unless specifically stated. The CT-F8282 uses standard line-level connections and fits naturally into a wide range of classic two-channel systems. Pioneer SX-950 Stereo Receiver The SX-950 creates a visually coherent period Pioneer system while providing convenient tape-monitor connections for recording and playback. Its warm and dynamic presentation complements cassette playback particularly well. Pioneer SX-1050 Stereo Receiver For a larger classic Pioneer system, the SX-1050 provides additional power and system scale while retaining the period-correct silver and wood presentation. Pioneer SA-9500 Integrated Amplifier The SA-9500 provides a strong analog control center with the tape connectivity needed to integrate the CT-F8282 cleanly into a separates-based system. Marantz 2275 Stereo Receiver The warmer tonal balance of the 2275 complements cassette playback particularly well and creates an attractive mixed-brand vintage system. Sansui AU-717 Integrated Amplifier The AU-717 offers a more controlled and neutral presentation, allowing the recorded character of the cassette source to remain clearly defined. A video demonstration may be available upon request, including cassette loading, playback, recording, fast-forward, rewind, pause, stop, meter response, Dolby B operation, tape selector operation, Memory Stop, and general music playback. Front-panel and knob protection. We can assist with cassette selection, tape-type settings, recording setup, Dolby B operation, Memory Stop operation, recording-level adjustment, output-level adjustment, RCA connection, DIN connection, receiver and amplifier integration, voltage configuration, and general operating questions. Important Vintage Audio Note. The Pioneer CT-F8282 is a precision vintage cassette deck and its performance depends heavily on the condition of the cassette tape being used. Avoid damaged, warped, sticky, or excessively worn tapes. Long-duration C-120 cassettes use thinner tape and should be treated with particular caution in vintage transports. This specific unit is marked for AC 120 / 220 / 240V, 50 / 60Hz, 54W. Confirm the voltage setting before connecting the deck to mains power. Use the correct tape-type settings when recording with Standard / LH, CrO? , or FeCr formulations for the best performance. Factory specifications double-checked against Pioneer documentation. True two-motor transport confirmed. Standard / CrO? / FeCr tape compatibility. Preamplifier / audio section serviced. Transport operation inspected and serviced. Head and tape-path areas cleaned. Recording and playback tested. Fast-forward and rewind checked. Dual level meters and controls evaluated. Multi-voltage operation confirmed from the actual rear panel. Original wood cabinet carefully preserved. Protective packaging for a precision vintage cassette deck. System setup and recording support. HQaudios – Vintage Audio Restored with Care.

]]> https://refurbishedcassetteplayer.com/pioneer-ct-f8282-vintage-stereo-cassette-deck-restored-1-year-warranty/feed/ 0 https://refurbishedcassetteplayer.com/pioneer-ct-20-stereo-cassette-tape-player-recorder-deck-refurbished-see-video/ https://refurbishedcassetteplayer.com/pioneer-ct-20-stereo-cassette-tape-player-recorder-deck-refurbished-see-video/#comments Tue, 28 Jul 2026 08:28:39 +0000 https://refurbishedcassetteplayer.com/pioneer-ct-20-stereo-cassette-tape-player-recorder-deck-refurbished-see-video/













This cassette deck has been refurbished and is in excellent working condition as shown in the video. All buttons and functions work as they should and the unit is in very nice physical condition as well. It comes with the original manual too.

]]> https://refurbishedcassetteplayer.com/pioneer-ct-20-stereo-cassette-tape-player-recorder-deck-refurbished-see-video/feed/ 0 https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-3/ https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-3/#comments Mon, 27 Jul 2026 20:27:38 +0000 https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-3/











Kenwood KX-W4030 Stereo Double Cassette Deck in good overall cosmetic condition. Tested and working properly. Both cassette decks function as intended, and all buttons and controls respond correctly. Dolby B/C Noise Reduction. Shows normal cosmetic wear from age and use. Please review all photos for the overall condition and exactly what is included. Power cord is attached. Little to no scratches.

]]> https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-3/feed/ 0 https://refurbishedcassetteplayer.com/vintage-kenwood-stereo-double-dual-cassette-deck-kx-w6030-refurbished/ https://refurbishedcassetteplayer.com/vintage-kenwood-stereo-double-dual-cassette-deck-kx-w6030-refurbished/#comments Mon, 27 Jul 2026 08:26:37 +0000 https://refurbishedcassetteplayer.com/vintage-kenwood-stereo-double-dual-cassette-deck-kx-w6030-refurbished/










New belts, lube, and head cleaning. Near perfect face plate. Operates as it should. Made in Japan early 90s.

]]> https://refurbishedcassetteplayer.com/vintage-kenwood-stereo-double-dual-cassette-deck-kx-w6030-refurbished/feed/ 0 https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-withbox/ https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-withbox/#comments Sat, 25 Jul 2026 20:23:38 +0000 https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-withbox/











Kenwood dual well cassette deck. Refurbished condition with all new belts, lubrication and head cleaning. Operating as designed and VERY good cosmetic condition.

]]> https://refurbishedcassetteplayer.com/kenwood-double-cassette-tape-deck-player-kx-w4030-refurbished-withbox/feed/ 0 https://refurbishedcassetteplayer.com/kenwood-kx-68w-stereo-double-cassette-deck-made-in-japan-refurbished/ https://refurbishedcassetteplayer.com/kenwood-kx-68w-stereo-double-cassette-deck-made-in-japan-refurbished/#comments Wed, 22 Jul 2026 08:14:40 +0000 https://refurbishedcassetteplayer.com/kenwood-kx-68w-stereo-double-cassette-deck-made-in-japan-refurbished/










Refurbished Kenwood dual cassette player/recorder. Belts, lube; and head cleaning. Heavy Japanese made unit, late 80s. Dual motor drives on each deck. Bench tested after going through. Faceplate is near perfect, top cabinet has rub marks.

]]> https://refurbishedcassetteplayer.com/kenwood-kx-68w-stereo-double-cassette-deck-made-in-japan-refurbished/feed/ 0